UltraTrim™ 2 Part Gutter Edge 2.5m

UltraTrim™ environmentally friendly flat roofing edging trims & accessories. Features & benefits of UltraTrim™ compared to other systems on the market include:

• Competitive price
• Base material more pliable and therefore does not shatter if dropped; enables installation on curved edges
• Superior finish and neater appearance when installed
• UV Stable
• Better design - mechanical fix of two part gutter edge trim as opposed to ‘snap-fit’ provides a more secure fix and prevents warping and ‘snap-out’ of two parts when factory seams or repair patches are present in the membrane

The gutter trim comes in 2 parts, a back plate and a drip edge plate; it is advisable to fix the back plate prior to the installation of the membrane.

Fix a 25 mm x 50 mm batten to the top of the fascia, level with the roof substrate to bring the trim over the gutter. Fix the back drip of the 2 part gutter trim to the batten, level with the top at approx 250 mm centres.

Once the installation of the EPDM membrane is completed the drip edge plate can be installed onto the back plate. Make sure that the membrane overhangs the back plate by a minimum of 70 mm, trim if necessary. Take the drip edge plate as shown below and locate the top edge of the plate under the top lip of the back plate, making sure the membrane is in between both plates.

Once you are sure that the drip edge plate is in place you can securely fix into position.